Sachtler aktive: An Inventive Take on the Video Fluid Head

Today, Sachtler announced their latest innovation with the aktive series of fluid heads. Made to replace the popular FSB models, these new products provide faster and more flexible operation.

The first introductions to Sachtler’s aktive line include the aktive6aktive8 (with options of a “side load” or “touch and go” plate), and aktiv10, all of which share the same design principles and generally differ in either payload capacity or bowl size. The aktive6 has a payload range of 0 to 17.6 pounds (0-8 kilograms) whereas the aktive8 and aktive10 have capacities of 0 to 26.5 pounds (0-12 kilograms). The aktive6 and aktive8 have 75mm leveling bowls and the aktive10 has a 100mm bowl. All aktive fluid heads have 15 steps of counterbalance.

The aktive6 weighs 5.7 pounds (2.6 kilograms) and has 3 drag settings. The aktive8 weighs barely more at 5.9 pounds (2.7 kilograms), has that greatly increased load capacity, and has 7 drag settings. The aktive8T, which is the “touch and go” version, weighs 6.2 pounds (2.8 kilograms). The aktive10 weighs 6.4 pounds (2.9 kilograms) and also has 7 drag settings.

One of the inventive ways that the Sachtler aktive series differs is with its SpeedLock technology which replaces the need for manipulating the traditional bowl clamp under the tripod head and instead places the release near the other controls on the tripod head itself. By lifting the lever on the front, the user can release the bowl lock, level the head, then push the lever back down to lock it in, all while keeping their hand in range of everything else for increased speed.

Another interesting development is the SpeedSwap feature. The aktive fluid heads can be removed quickly as there is not a bowl leveling clamp underneath that needs to be undone first. The example Sachtler uses is being able to take the aktive head off, add a slider onto the tripod, then add the fluid head onto the slider all very effortlessly. For this fast swapping to be possible, additional products like this 75mm bowl adapterthis adapter for the slider attachment, and this adapter for the head attachment to the slider are necessary.

The fluid heads also feature an illuminated PrismBubble which can be viewed from all angles including the top, side, and below and in any lighting condition with a press to enable the LED. Also helpful is that the LED will illuminate the tension settings for pan and tilt.

Sachtler aktive fluid heads are available for purchase alone or as kits with their flowtech line of tripods. Paired with flowtech tripod legs, the combination is able to be lowered straight to ground level shooting as the legs can go flat and the aktive heads have no release clamp on the underside to block it from doing so. Purchasing alone, the Sachtler aktive6 will cost $1,448.75, both versions of the aktive8 are $1,866.75, and the aktive10 is $2,422.50.


Add comment

%d bloggers like this: